Svetsmaskin Junior

The electrofusion welding unit model Euro JUNIOR
is a polyvalent unit suitable for the welding of all
electrofusion fittings up to diameter d. 160. It allows to
operator to work at safety voltage lower than 50 Volt, is
manufactured according to UNI 10566 and ISO 12176-
2 standards, as well as provided with CE mark.
The heating power is automatically adjusted, reading
of the barcode by means of a scanner or manual
entering of the 24 digits shown under the barcode, or
manually by setting of the welding voltage and time.
Automatically (scanner or 24 digits) the heating power
is adjusted by the ambient temperature.
A display and the intuitive keyboard guide the operator
during all operative phases of the programming,
displaying the evolution of ambient temperature,
the welding voltage and current, the cycle time, the
progressive number of weldings and the possible error
or malfunctioning messages.
When switching-on the supply voltate is measured and
displayed for proper control.
The welding unit model Euro JUNIOR is enabled in the
storing of the operator code, of the site location, of the
welding data and hour and of the welding parameters.
The scanner is enabled for the reading of the
traceability barcodes of fittings and pipes and allows
the maximum operative ease in all site conditions.
The welding unit model Euro JUNIOR is supplied with
USB connection port (pen drive is not included) to
allow the transfer of the welding reports in PDF format
to the PC.
The welding unit must be submitted to periodic
overhaul (biennal) according to manufacturer and to
standards UNI 10566 and ISO 12176-2